• Welcome to Hangzhou Roll Forming Machinery Co., Ltd
  • With more than 20 years experience of research and development
HANGZHOU ROLL FORMING MACHINERY CO., LTD
Products   -   Deck   -   100 Floor Deck Plate Rolling Forming Machine
This floor deck plate roll former is designed for continuously rolling and cold-forming steel sheets. It adopts steel sheet as the raw material, decoiling, continuously rolling and cold-forming, then automatically cutting the sheet to specified size and conveying the finished panel to the runout table. PLC control and frequency speed-adjusting technology help realize automatic production. This floor deck plate roll forming machine is an energy-saving and highly-effective production equipment for steel structure.
Technical Parameter
Item Parameter Remark
Material Type Colored coating steel
(mm) 1250
Thickness (mm) 0.4-0.7
Yield strength (MPa) 235-300
Coil capacity (T) 10
Forming Speed (m/min) 20 Cutting time excluded
Roller Material No. 45 steel Hard chrome plated
Cutting Mode Hydraulic station cutting
Power Source Type 380V / 3PH / 50HZ
Main motor power (kW) About 5.5 × 2 According to actual design
Total power (kW) About 22 According to actual design
Machine Dimensions See layout
Components of Floor Deck Plate Rollformer
Name Quantity Description
Uncoiler (capacity: 10t) 1 set Structure: arm-type Expanding mode: hydraulic Releasing mode: electrical Ultrasonic control and coil car
Main Machine Guiding device 1 set 1. Material of roller: No. 45 steel with hard chrome plated surface. 2. Inner support structure of roller: guiding column. 3. The back/forward movement of roller is driven by chain, and its upward/downward movement is driven by gear. 4. Material of cutting blade: Cr12 tool steel, quenching treated.
Pre-cutting device 1 set
Roll forming system 1 set
Post cutting device 1 set
PLC Control System 1 set Mitsubishi
Hydraulic Station 1 set Well-known Chinese brand
Component Details
Decoiler:
Max. loading capacity (t): 10
Coil ID (mm): φ508 / φ610
Max. material width (mm): 1250
Max. coil OD (mm): φ1500
Guiding device:
it adopts guiding bar and sliding block to control the width and position of the steel sheet. The sheet is guided in the correct position and moves to the roll forming equipment.
Roll forming machine:
1) Machine frame: welding structure with blasting treatment.
2) The roller is made by high quality No. 45 steel with hard chrome plated surface.
3) Inner support structure of roller: guiding column.
Post-cutting device:
1) Material of cutting blade: Cr12 tool steel, quenching treated.
2) The power of cutting is provided by hydraulic station.
Electric control system:
1. PLC control and frequency speed-adjusting technology help realize automatic production.
2. Easy and convenient to set the plate length, quantity, etc.
Hydraulic station:
1. Provide power.
2. Well-known Chinese brand main valve.

More Projects