• Welcome to Hangzhou Roll Forming Machinery Co., Ltd
  • With more than 20 years experience of research and development
HANGZHOU ROLL FORMING MACHINERY CO., LTD
Products   -   Tile   -   183 Tile Making Machine
This roof tile roll forming machine is designed for continuously rolling and cold forming steel sheets. It adopts steel sheet as the raw material, decoiling, continuously rolling and cold-forming, then automatically cutting the sheet to specified size and conveying the finished panel to the runout table. This roof tile making machine uses PLC control and AC frequency speed adjusting technology to realize continuous production. It is an energy-saving and highly-effective production equipment for roof tiles.

Roof Tile Roll Forming Machine Technical Parameter
Item Parameter Remark
Material Type Color coated steel sheets
Thickness (mm) 0.45-0.55
Yield strength (MPa) 230-300
Coil (mm) 1250
Coil weight (t) 5
Coil OD (mm) Φ1350
Coil ID (mm) Φ 490-510
Material of roller No. 45 chrome plate
Forming speed (m/min) 4-5 Cutting time excluded
Total power (kW) 12 According to actual design
Dimension (L × W × H, m) See the layout According to actual design


Roof Tile Making Machine Working Process
Decoiling → feeding → roll forming → punching → cutting to length → conveying the finished panels to the runout table

Component List

Item Quantity Technical Description
Decoiler system Cantilever type hydraulic decoiler 1set Structure: cantilever-type. Expansion mode: hydraulic. Releasing mode: hydraulic.
Main forming system Guiding device 1set 1. Material of roller: No. 45 steel with hard chrome plated surface. 2. Inner support structure of roller: guiding column. 3. The back/forward movement of roller is driven by chain, and its upward/downward movement is driven by gear. 4. Cutting blade material: Cr12 with quenching treatment.
Roll forming system 1set
Punching device 1 set
Post-cutting device 1 set
Output system Runout table 1 set For supporting the finished panels and stacking them together.
Hydraulic system 1 set Separated hydraulic stations are designed to provide power for post-cutting machine and punching device.
Electric control system 1 set PLC Control, encoder automatic cutting in length Operation stage: Touch screen+ button AC frequency for adjusting the speed


1. Cantilever type automatic decoiler (with ultrasonic control and coil car)


2. Guiding device
a. It adopts guiding bar and sliding block to control the width and position of the steel sheet.
b. The sheet is guided in the correct position and moves to the roll forming equipment.


3. Roll forming system
Roll forming system consists of machine frame, transmission parts, roll forming rollers, etc.
a. Machine frame: welding structure with blasting treatment.
b. The roller is made of high quality No. 45 steel with hard chrome plated surface.
c. Inner support structure of roller: guiding column.
d. Back/forward movement of roller is driven by chain, and part of the upward/downward movement is driven by gear.
e. Manually adjust the screw bar to adjust the distance between upper and lower rollers for sheets with different thicknesses.


3. Punching device


4. Post-cutting device
a. Cutting blade material: Cr12, quenching treated.
b. There is no material wasted after cutting.
c. Welded frame for enhanced rigidity.
d. The power of cutting is supplied by motor.


5. Runout table
It’s used to support the finished panels and stack the panels together after cutting.

6. Electric control system
a. PLC control and frequency speed adjustment help realize automatic production.
b. Human and machine interface facilitates the setting of plate length, quantity, etc.
c. Operation mode: touch screen and buttons.
d. Encoder is designed to calculate and measure the length of panels.

7. Hydraulic system
Separated hydraulic stations are designed to provide power for post-cutting machine and punching device.

More Projects