• Welcome to Hangzhou Roll Forming Machinery Co., Ltd
  • With more than 20 years experience of research and development

Products   -   Roof tile making machine   -   207 Tile Making Machine
This roof tile making machine is designed for continuously rolling and cold forming steel sheets. It adopts steel sheet as the raw material, decoiling, continuously rolling and cold-forming, then automatically cutting the sheet to specified size and conveying the finished panel to the runout table. This roof tile roll forming machine adopts PLC control and AC frequency speed adjusting technology to realize continuous production. It is an energy-saving and highly-effective production equipment for roof tiles.

Working Flow
Decoiling → guiding → roll forming → measuring length → cutting the sheet → conveying the final products to the runout table

Technical Parameter

Item Parameter Remark
Material Type Colored coating sheet
(mm) 1000
Thickness (mm) 0.5 - 0.6
Yield strength (MPa) 230-300
Coil capacity (t) 5
Product speed (m/min) 3 - 4 According to actual design
Material of roller No. 45 steel Hard chrome painted.
Power source AC380V, 60 Hz, 3 Phase
Total power (kW) 12 Depend on final design
Dimensions (m) See the layout Depend on final design

Machine Components

Item Quantity Description
Manual decoiler (capacity: 5t) 1 set 1. Manually expand to hold sheet coils. 2. Passively decoil sheets.
Main machine Guiding device 1 set
Roll forming system 1 set 1. Material of roller: No. 45 steel with hard chrome plated surface. 2. Inner support structure of roller: guiding column. 3. The back/forward movement of roller is driven by chain, and its upward/downward movement is driven by gear.
Post-cutting device Cutting blade material: Cr12 with quenching treatment.
Runout table 1 set 1. For supporting the finished panels. 2. Two runout tables are designed, with each table 3-meter long.
PLC control system 1 set 1. PLC control. 2. Operation: touch screen and buttons. 3. AC frequency for adjusting the speed.
Hydraulic station 1 set Separated hydraulic stations are designed to provide power to post-cutting device and punching device.

Component Details
1. Decoiler (with light control)

2. Guiding device
1) It adopts guiding bar and sliding block to control the width and position of the steel sheet.
2) The sheet is guided in the correct position and moves to the roll forming equipment.

3. Roll forming system
1) Machine frame: welding structure with blasting treatment.
2) The roller is made of high quality No. 45 steel with hard chrome plated surface.
3) Inner support structure of roller: guiding column.
4) Back/forward movement of roller is driven by chain, and part of the upward/downward movement is driven by gear.
5) Manually adjust the screw bar to adjust the distance between upper and lower rollers for sheets with different thicknesses.

4. Cutting device
1) Cutting blade material: Cr12, quenching treated. No material is wasted after cutting.
2) Welded frame for enhanced rigidity.
3) The power of cutting is supplied by hydraulic cylinder.

5. Runout table
1) It’s used to support the finished panels manually.
2) Two runout tables are designed, with each table 3-meter long.

6. Electric control system
1) PLC control and frequency speed adjustment help realize automatic production.
2) Human and machine interface facilitates the setting of plate length, quantity, etc.
3) Encoder is designed to calculate and measure the length of panels.
4) Operation mode: touch screen and buttons.
5) Mitsubishi frequency inverter.

7. Hydraulic station
1) Separated hydraulic stations and cooling system are designed.
2) Main valve: well-known Chinese brand.

More Projects