• Welcome to Hangzhou Roll Forming Machinery Co., Ltd
  • With more than 20 years experience of research and development
HANGZHOU ROLL FORMING MACHINERY CO., LTD
Products   -   Tile   -   210 Roofing Tile Forming Machine
This roofing tile roofing machine is designed for continuously rolling and cold-forming steel sheets. It adopts steel sheet as the raw material, decoiling, continuously rolling and cold-forming, then automatically cutting the sheet to specified size and conveying the finished panel to the runout table. This roofing tile making machine is an energy-saving and highly-effective production equipment for roofing tiles.

Roofing Tile Forming Machine Technical Parameter
Item Parameter Remark
Material Type Colored coating steel sheets
Thickness (mm) 0.5-0.6
Yield strength (MPa) 235
(mm) 1250
Coil weight (t) 5
Coil OD (mm) Φ1350
Coil ID (mm) Φ490-510
Material of roller No. 45 chrome plate
Forming speed (m/min) About 4-5 Cutting time excluded
Total power (kW) 12 Depend on final design
Dimensions (m) See the layout Depend on final design


Roofing Tile Making Machine Working Process
Decoiling → feeding → roll forming → punching → cutting to length → conveying the finished panels to the runout table

Component List

Item Quantity Technical Description
Decoiler system Cantilever type hydraulic decoiler 1 set Structure: cantilever-type. Expansion mode: hydraulic. Releasing mode: hydraulic. Light control and coil car.
Main forming system Guiding device 1 set 1. Material of roller: No. 45 steel with hard chrome plated surface. 2. Inner support structure of roller: guiding column. 3. The back/forward movement of roller is driven by chain, and its upward/downward movement is driven by gear. 4. Cutting blade material: Cr12 with quenching treatment.
Roll forming system 1 set
Punching device 1 set
Post-cutting device 1 set
Output system Runout table 1 set 1. For supporting the finished panels. 2. Two runout tables, each table is 2-meter long.
Hydraulic system 1 set Separated hydraulic stations are designed to provide power for post-cutting device and punching device.
Electric control system 1 set 1. PLC control. 2. Operation: touch screen and buttons. 3. AC frequency for adjusting the speed.


Component Details
1. Cantilever type automatic decoiler (with ultrasonic control and coil car)


2. Guiding device
a. It adopts guiding bar and sliding block to control the width and position of the steel sheet.
b. The sheet is guided in the correct position and moves to the roll forming equipment.


3. Roll forming system
Roll forming system consists of machine frame, transmission parts, roll forming rollers, etc.
1) Machine frame: welding structure with blasting treatment.
2) The roller is made of high quality No. 45 steel with hard chrome plated surface.
3) Inner support structure of roller: guiding column.
4) Back/forward movement of roller is driven by chain, and part of the upward/downward movement is driven by gear.
5) Manually adjust the screw bar to adjust the distance between upper and lower rollers for sheets with different thicknesses.


4. Punching device


5. Post-cutting device
1) Cutting blade material: Cr12, quenching treated.
2) There is no material wasted after cutting.
3) Welded frame for enhanced rigidity.
4) The power of cutting is supplied by motor.


6. Runout table
It’s used to support the finished panels and stack them together after cutting.


7. Electric control system
1) PLC control and frequency speed adjustment help realize automatic production.
2) Human and machine interface facilitates the setting of plate length, quantity, etc.
3) Operation: touch screen and buttons.
4) Encoder is designed to calculate and measure the length of panels.


8. Hydraulic station
Separated hydraulic stations are designed.

More Projects