The Main roll former about the pipe support profile roll forming machine can produce 41×41mm and 41×21mm pipe support profile at same machine.
When the profile is changed, operator needs to adjust some roller spacer bush and change some forming rollers, and then the profile can be changed well.
pipe support profile roll forming machine Components List
|Motor decoiler||1 set (decoiler capacity is 2 tons)|
|Hydraulic Cutter||2 sets|
|Main roll former||1 set|
|Hydraulic Cutter||1 set (flying cutter model)|
|PLC control system||1 set|
|Final products rack||1set (total length is 6 meters)|
pipe support profile roll forming machine Technical Specification
|Raw material||Galvanized steel plate (yield strength: 235Mpa)|
|Coil width||according to final test data|
|Coil max weight||2 Tons|
|Line working speed||12m/min (not include cut time)|
|Each piece final products length tolerance||±2.0mm|
|Roll forming line power source||380V/50Hz/3 Phase|
pipe support profile roll forming machine Working Flow
De-coiler-leveler&feeder-puncher- roll former-cuter-final products output
pipe support profile roll forming machine Profile drawing
pipe support profile roll forming machine Layout drawing
Finished products for pipe support profile roll forming machine
Roller Shutter Door Forming Line
the main device of door shutter roll forming machine adopts combine roller station style. It is chain transmission, AC motor drives, through frequency to adjust speed. Rollers material is Cr12 steel with heat and surface polish treatment....
Dry Wall Roll Forming Machine
The dry wall Roll Forming Machine adopts the Individual Roller Station, drives by Gear Box. Adjust and install the Spacers to produce different width Dry Wall Plates....
Refrigerator Panel Roll Forming Machine
Cantilevers drive by gear, this type roll former advantage: adjust the plate width quickly. After cutting sheet, the sheet goes for roll forming, sheet goes though the Roller Stations one by one, and finally the sheet becomes the plate....
Electrical cabinet post roll forming machine
The main roll former about the electrical cabinet post roll forming machine uses single forming stand model, welded steel base plate....
Filter frame roll forming machine
The cutter model about the filter frame roll forming machine is flying cut; it is continuous cut style;There is no waste piece after cut actions....
Pipe support profile roll forming machine
The Main roll former about the pipe support profile roll forming machine can produce 41×41mm and 41×21mm pipe support profile at same machine....
Double row Special roof forming machine
Double row special roof forming machine is including two hydraulic stations.The hydraulic system is developed aiming to the multi-station punching machine....