• Welcome to Hangzhou Roll Forming Machinery Co., Ltd
  • With more than 20 years experience of research and development
HANGZHOU ROLL FORMING MACHINERY CO., LTD
Products   -   Roof tile making machine   -   Roof tile making machine
Description
This Roof tile making machine is the special equipment for continuous rolling and cold-forming on steel sheet. It adopts coiling steel sheet as the raw material, decoiling, then continuous rolling and cold-forming, automatically cut to the size and output the finished panel to the supporter. Roof tile making equipment is really a new type of energy-saving and high-effective producing equipment for steel structure.


Technical Parameters for Roof Tile Making Machine
NO Item Para Remark
1 Suitable material Type Colored coating steel
Thickness (mm) 0.5-0.6
Yield Strength (Mpa) 230-300Mpa
Width (mm) 1220
Wt of the Coil (t) 5T
OD Φ1350mm
ID Φ508 mm/Φ610mm
2 Material of rollers No45 chromeplate
3 Forming Speed (m/min) 3-4 Not including cutting time
4 Power Source AC380V ,50Hz, 3 Phase
5 Total power(kw) About13
6 Dimension (L×W×H, m) See the layout



Working Process for Roof Tile Making Machine
Decoiling→guiding device→roll forming→punching→post cutting→product supporter


Components Parts of the Roof Tile Making Equipment
Name Model/Name Quantity Technical Description Components show
1.Decoiler system 5T Cantilever type hydraulic decoiler 1set Cantilever, hydraulic expanding, hydraulic motor actively release the sheet with light control
2.Main forming system Pre-cutting device 1set 1. Roller material:No.45 steel with surface hard chrome painted. 2. Roller inner supporting structure type: guide column 3. Planetary gear speed reducer motor driving, the back/forward rollers driven by chain, part of upper/lower rollers driven by gear 4.Cutting blade material Cr12 quenched treatment
Guiding device 1set
Roll forming system 1set
Punching Die 1set
Post-cutting device 1set
3. Output system Supporting Table 1sets For supporting the finished panel.
4. Hydraulic system 1set Hydraulic station
5. Electric control system 1set PLC Control, encoder automatic cutting in length Operation stage: button AC frequency for adjusting the speed
Roof tile making machine (Profile and layout drawing)
Finished products show ( Roof tile)

More Projects

Hangzhou Roll Forming Machinery Co., Ltd About Us